Link ECU - G5 Voodoo Pro

$5,164.00

The G5 Voodoo Pro puts real magic in your hands, with 24 injection/ignition channels, Gasoline Direct Injection control, dual onboard E-throttle and Lambda, built-in GPS, plus much more.

Powered by our latest G5 platform, this true generational leap is a successor to our championship winning G4X.

12 Injection, 8 Ignition and 4 multi-purpose (inj, ign, aux) channels, allow you to control up to 12 cylinders with sequential injection and direct spark. The multi-purpose channels allows two stage injection on up to 8 cylinders (16 injection & 8 ignition).Control Gasoline Direct Injection on 12 Injection channels.*Dual Onboard Digital Wideband Lambda controllers, no separate boxes required. Built-in Global Positioning System (GPS).Dual onboard E-throttle with internal solid-state relays. Our ECUs and Razor PDM are backed by Link’s Limited Lifetime Warranty.

The G5 Voodoo Pro puts real magic in your hands, with 24 injection/ignition channels, Gasoline Direct Injection control, dual onboard E-throttle and Lambda, built-in GPS, plus much more.

Powered by our latest G5 platform, this true generational leap is a successor to our championship winning G4X.

12 Injection, 8 Ignition and 4 multi-purpose (inj, ign, aux) channels, allow you to control up to 12 cylinders with sequential injection and direct spark. The multi-purpose channels allows two stage injection on up to 8 cylinders (16 injection & 8 ignition).Control Gasoline Direct Injection on 12 Injection channels.*Dual Onboard Digital Wideband Lambda controllers, no separate boxes required. Built-in Global Positioning System (GPS).Dual onboard E-throttle with internal solid-state relays. Our ECUs and Razor PDM are backed by Link’s Limited Lifetime Warranty.

Inputs/Outputs

  • Control any engine with 2 cylinders, all the way up to 12 cylinders, thanks to:

    • 12 injector pins

    • 8 ignition pins

    • 4 injector/ignition dual role pins

  • Access up to 30 auxilary pins (when setup for a 4-cylinder sequential engine):

    • 8 dedicated auxiliary pins

    • 4 shared e-throttle/H-Bridge pins

    • 2 shared wideband heater pins

    • Up to 16 from spare injector and ignition drives

  • Any unused injector/ignition pins can be used as an auxiliary pin

  • All ignition and auxiliary pins are back feed protected.

  • 14 analog inputs

  • 10 digital inputs

  • 4 temperature inputs

  • Dual knock inputs

  • 2 trigger inputs

  • Dedicated ignition switch pin

  • 2 x internal wideband lambda controllers

  • Dual e-throttle, with internal solid state throttle disconnect relays

  • 5v sensor supply

  • CAN 1 input now supported via CAN connector

 

Communications

  • USB-C (cable included)

  • Connect directly to the ECU via built-in Wifi Access Point, or add it to an existing network (Antenna Included)

  • Dual CAN (CAN 1 on CAN connector, CAN 2 on header E)

  • GPS (antenna included)

 

Size & Weight

  • Length: 177.1mm (6.97 inches)

  • Width: 137.3mm (5.40 inches)

  • Min side height: 15.5mm (0.61 inches)

  • Max side height: 40.2mm (1.58 inches)

  • Weight: 795g (28 ounces)

 

Connectivity

The G5 Voodoo Pro supports the following comms standards:

  • USB-C

  • Wi-Fi

  • CAN

  • GPS

 

The G5 Voodoo Pro uses the Super Seal A, B & E plugs.

It is now possible to connect to your ECU using a standard USB-C cable, or alternatively by using WiFi.

You can now access CANBUS 2 via its own dedicated pins in Header E freeing up two Digital Inputs.

GPS connectivity can be initialised by simply adding a GPS antenna.