Link ECU - G5 Voodoo Neo 6

$4,505.00

G5 Voodoo Neo 6

The next generation of engine management for many more engines. 

The G5 Voodoo Neo 6 can run:

8 cylinders port or direct injection and direct spark, or 
6 cylinders with direct/port staged injection, and direct spark


The G5 Voodoo processing units are the perfect choice for professional level motorsport.

The G5 Voodoo Neo 6 works on a variety of vehicles, please contact a LinkECU Reseller or Technical Support for advice regarding your specific project.


In the box:

  • G5 Voodoo Neo 6 ECU

  • USB-C Connection Cable

  • WiFi Antenna

  • 4m GPS Antenna (Magnetic or Adhesive Mount)

  • USB-C and SMA Dust Covers

  • QuickStart Guide (A5)

  • Installer I/O table (A3)

  • Link stickers

G5 Voodoo Neo 6

The next generation of engine management for many more engines. 

The G5 Voodoo Neo 6 can run:

8 cylinders port or direct injection and direct spark, or 
6 cylinders with direct/port staged injection, and direct spark


The G5 Voodoo processing units are the perfect choice for professional level motorsport.

The G5 Voodoo Neo 6 works on a variety of vehicles, please contact a LinkECU Reseller or Technical Support for advice regarding your specific project.


In the box:

  • G5 Voodoo Neo 6 ECU

  • USB-C Connection Cable

  • WiFi Antenna

  • 4m GPS Antenna (Magnetic or Adhesive Mount)

  • USB-C and SMA Dust Covers

  • QuickStart Guide (A5)

  • Installer I/O table (A3)

  • Link stickers

Inputs/Outputs

  • Control up to 8 cylinders with port or direct injection and direct spark, or 6 cylinders with direct/port staged injection, thanks to:

    • 12 injector pins

    • 8 ignition pins

    • 6 aux. output pins 

    • (4 injector pins are shared with 4 DI Pins. You can only use each pin for either Injection or DI, not both at the same time.)

    • 6 ADIO pins

  • Highly customisable IO, using 2 types of multi purpose pins: ADIO pins and Injector/Digital-Input pins. These pins can act as inputs or outputs.

  • ADIO are a unique pin type. ADIO can act as an Aux Output (switched or PWM), as an Analogue Input, or as a Digital Input, but cannot read PWM/frequency.

  • Neo 6 has Inj/DI pins which are used as either an injector pin, Aux or a Digital Input pin. They can read PWM/frequency.

  • Any unused injector/ignition pins can be used as an auxiliary pin.

  • All ignition and auxiliary pins are back feed protected.

  • 3 analog inputs

  • 10 digital inputs

  • 4 temperature inputs

  • 2 knock inputs

  • 2 trigger inputs

  • 1 x wideband lambda controller

  • Dual H-Bridge e-throttle control 

  • Dedicated ignition switch pin

  • 5v sensor supply

  • CAN 1 via Weipuconnector. CAN connector now supplies power and ground. 

 

Communications

  • USB-C (cable included)

  • Power over USB

  • WiFi: Connect directly to the ECU via built-in Wifi Access Point, or add it to an existing network (antenna included)

  • CAN: New WEIPU connector supplies power for CAN devices

  • Ethernet: Built in ethernet which can function like USB. Also adds the ability to connect to the ECU over a network. 

  • GPS: Functional when GPS antenna connected (antenna included)

 

Data Logging 

  • 1gb logging capacity

  • Logging over WiFi 

  • 100kHz max. total logging rate 

  • 250 logging channels

 

Size & Weight

  • Length: 107mm (4.21 inches)

  • Width: 158mm (6.22 inches)

  • Max side height: 45mm (1.77 inches)

  • Weight: 730grams (25.75 ounces)  

 

Mounting

  • 4x M5 threaded mount holes on the sides for bracket mounting 

  • 4x M5 threaded mount holes on the underside for clean mounting 

  • 4 x 5.5mm unthreaded through holes for mounting through (designed for use with M5 bolts)

 

Connectors 

A Header

Link Pin Kit A 

TE Superseal 1.0

B Header

Link Pin Kit B

TE Superseal 1.0

Wi-Fi

Wi-Fi Antenna 

RP-SMA (reverse polarity) 

GPS

 

SMA

USB

 

USB Type-C

Ethernet

 

WEiPU SF810B/P8

CAN1

 

WEiPU SF610B/P4